To make your speaker wire tester, simply take some speaker wire and electrical tape the positive wire to the positive post and the negative wire to the negative end of the battery.
This converter can then be connected directly to your amplifier's line level inputs.
So all that's left now is to connect our speaker wire from the amp to the sub, and I've got some speaker wire right here, and we'll go ahead and carol cox having sex the wire speaker wire.
Since we don't, that's why we need the line output converter to convert speaker wire into our RCAs.
In about a 9-hour drive, I could make it.
Every amp has pre-drilled mounting screw holes located on each of the four corners of the amp for easier mounting.
All right, so the first thing we're going to do is disconnect the negative terminal from the battery, so that we don't shock anything or blow anything up.
Make sure the output wattage of your speakers and amplifier--as well as impedances--match to prevent damage to your audio equipment.
Warnings Be careful when around the electrical system of your car.
Every car is different, but I would try it at the factory sub first, see how it sounds and then go from there.